Skip to main content
  • Protection Guaranteed
  • Made to Measure
  • Precision Custom Fit
  • Any Shape
  • Design Expert Verified
Custom Swamp Cooler Covers
Home  >   Collections

  >   Custom Swamp Cooler Covers

Product features

From simple silhouettes to complex designs — any shape, any size, any style, we bring your perfect custom design to life. And if you’re looking for something truly unique, just give us a call at +1 720-882-0756. Our team will be happy to help you create almost any custom shape you can imagine!

Amazing offers to maximize your savings
Claim now

Good swamp cooler covers are sized to the cabinet, sealed at the hem so winter wind cannot push through the pad bays, and tough enough for a rooftop winter. ZIPCovers makes each one to your measurements in heavy-duty PVC-coated polyester, waterproof. Pick ZIP Armor, with an up to 10-year warranty, or ZIP Shield, with a 7-year warranty.

What this collection covers and who it is for

This collection holds custom covers for the three common swamp cooler configurations: downdraft rooftop units, side-discharge units, and round down-discharge units. Each cover is cut to your cabinet's width, depth and height, with the seal placed where your unit needs it.

A swamp cooler does its job in summer and then sits idle for months. Through winter, its pad bays and duct connection become an open path for cold air into the house. The result is cold drafts at the ceiling register, heating bills that creep up, and a furnace or heat pump that runs longer than it should. A fitted cover closes that path.

These covers are for homeowners with an evaporative cooler on the roof or beside the house, especially in high-desert and mountain areas with cold winters, landlords and property managers looking after several units, and businesses with coolers on shops, garages and workshops.

How to choose an evaporative cooler cover

Start with the configuration of your unit.

  • Downdraft rooftop units. The cooler sits on the roof and blows down into the duct. Measure the cabinet width, depth and height from the curb to the top of the louvers. The drawstring sits at the bottom to seal against the roof curb.
  • Side-discharge units. The cooler sits beside the house or low on the roof and blows sideways through the wall. These covers usually need a drawstring at the top rather than the bottom, because the seal point is at the wall connection.
  • Round down-discharge units. A round cabinet that blows down. The drawstring at the bottom seals against the roof curb or the cabinet pedestal.

The cut is different for each unit, but the fabric and the warranty are the same.

Then pick the fabric grade. ZIP Armor suits high-altitude winters, heavy snow on the roof and storm-prone sites. ZIP Shield suits milder winters where the cooler still needs a draft seal but heavy snow is rare.

If your cooler has grilles you want to close off separately, tell us. We can cut swamp cooler vent covers to the size of each opening.

How to measure your swamp cooler

  1. Width. Measure the cabinet from side to side at the widest point.
  2. Depth. Measure from front to back at the widest point.
  3. Height. Measure from the curb, pedestal or ground to the top of the cabinet or louvers.
  4. Round units. Measure the diameter at the widest point and the height.
  5. Side-discharge units. Note where the duct meets the wall and how much space there is around it.
  6. Note any pipes, wiring, float valves or brackets on the outside of the cabinet.

Write the numbers down and note which is which. If you are unsure, send us a photo of the unit with the tape in view. We would rather confirm a number than make a cover twice. Work safely on the roof: use a secure ladder and have someone with you.

Fabric and build of our swamp cooler covers

Swamp cooler covers sit through the hardest weather a rooftop sees: strong UV at altitude, freeze-thaw cycles, sudden snow in the mountains, and dust storms across the high desert. The waterproof PVC-coated polyester we use is built for that. The coating resists chalking in the sun, the fabric resists cracking at the fold corners when temperatures drop overnight, and the seams hold through the winds that lift lighter covers off rooftops.

  • Drawstrings or grommet-and-bungee tie-downs at the base, so the cover stays seated on the curb
  • Double stitching at the corners
  • Reinforced panels at the discharge grille or louver openings
  • A mildew-resistant treatment, so the inside does not turn green in a wet spring before the cover comes off

ZIP Armor is the better pick for high-altitude winters and heavy-snow roofs. It comes with an up to 10-year warranty. ZIP Shield is better for winters where snow load is rare and comes with a 7-year warranty. ZIP Armor is 18 oz/12 oz, 1000 denier. The difference is the performance rating and warranty.

Winterizing before the cover goes on

The cover is the last step of winterizing, not the first.

  • Turn off the water supply to the cooler and drain the pan and lines.
  • Switch off the power to the unit.
  • Clean out the pan and check the pads.
  • Close any ceiling damper or duct shutter inside the house if you have one.
  • Then fit the cover and tighten the drawstring or tie-downs.

Use cases and weather

A rooftop cooler takes the full force of winter:

  • Cold wind pushed through the pad bays into the duct
  • Snow and ice sitting on the cabinet top
  • Freeze-thaw cycles on the cabinet and fittings
  • Dust storms that clog pads and louvers
  • Strong UV at altitude that breaks down lighter covers

A cooler cover roof installation that stays sealed keeps cold air out of the house and protects the unit until spring.

Warranty and our promise

ZIP Armor covers have a 10 year warranty and ZIP Shield covers have a 7 year warranty. Each cover is made to the measurements you send and backed by our Protection Guaranteed promise.

Sizes and variants

Because each cover is made to order, you are not limited to a size chart. This collection contains covers for coolers with downdraft, side-discharge, and round down-discharge configurations. For smaller evaporative air cooler covers, see our evap cooler covers. For other outdoor equipment, browse our full range of custom covers.

Frequently Asked Questions

5 Easy Ordering Steps

Choose your product, input dimensions, select fabric, personalize, review your order & place your order!

1
Measure Measure
2
Choose Choose Fabric
3
Personalize Personalize
4
Measure Review
5
Order Place Order