Skip to main content
  • Protection Guaranteed
  • Made to Measure
  • Precision Custom Fit
  • Any Shape
  • Design Expert Verified
Custom Patio Heater Covers
Home  >   Collections

  >   Custom Patio Heater Covers

Product features

From simple silhouettes to complex designs — any shape, any size, any style, we bring your perfect custom design to life. And if you’re looking for something truly unique, just give us a call at +1 720-882-0756. Our team will be happy to help you create almost any custom shape you can imagine!

Amazing offers to maximize your savings
Claim now

A good patio heater cover is cut to the shape of your heater, keeps rain and sun off the burner, reflector and controls, and stays on in wind. ZIPCovers makes each one to your measurements in PVC-coated polyester, waterproof. ZIP Armor carries an up to 10-year warranty for harsh climates and ZIP Shield a 7-year warranty for moderate ones.

What this collection covers and who it is for

Our collection contains patio heater covers for the three basic shapes of heaters: tower and mushroom heaters with a reflector dish on top, slim column and pyramid heaters, and wall-mounted infrared heaters. Each cover is cut to the height of your heater and the width of the reflector, as well as the base.

A patio heater spends most of its life switched off and standing outside. Between uses, rain gets into the burner and igniter, sun fades the finish, dust and insects settle in the controls, and salt air or freeze-thaw cycles work on every seam and fitting. A fitted outdoor heater cover protects the unit through those hours and months.

These covers are for homeowners with a heater on a patio, deck or pool terrace, restaurants, bars and cafes with heaters across an outdoor seating area, and anyone storing heaters outside over the off-season.

Tower, column, pyramid and wall-mounted: three cover shapes

Start with the shape of the heater.

  • Tower and mushroom heaters. A tall cover with a reinforced top panel that sits on the reflector dish and a drawstring or hem at the base. Measure the height to the top of the dish and the dish's width.
  • Column and pyramid heaters. A slim, full-length cover for square column units and glass-tube pyramid heaters. Glass-tube units especially need a cover, because UV wears on the seal at the top of the tube. A pyramid heater cover is cut to the base, the top and the full height.
  • Wall-mounted infrared heaters. A flat wrap with a drawstring at the back, so it stays sealed against the wall surface and the electrical mount.

If you have a tower heater cover from another brand that never fitted well, measure your unit instead of copying the old size. Heaters that look alike can differ by an inch or more in height and reflector width, and a cover made to your numbers sits close.

How to measure your patio heater

  1. Height. Measure from the ground to the highest point of the reflector, dish or top cap.
  2. Top width. Measure the widest point of the reflector or top panel.
  3. Base. Measure the width of the base, or its diameter if it is round.
  4. Column. For a column or pyramid heater, measure the width of the body at its widest point.
  5. Wall-mounted. Measure the width, height and depth of the unit, and note where the bracket and cable meet the wall.

Write the numbers down and note which is which. If you are unsure, send us a photo of the heater with the tape in view. We would rather confirm a number than make a cover twice.

Safety first: using a cover without fire risk

PVC-coated polyester suits outdoor covers, but it is not a fire-retardant material rated for direct heat. The cover protects the heater while it is not running. It must never go on a heater that is lit or hot.

  • Shut the heater down at the end of the evening.
  • Let it cool fully: allow about 15 to 20 minutes for a tower unit and 5 to 10 minutes for an infrared unit.
  • Then put the cover on.
  • Take the cover off fully before you light or switch on the heater again.
  • For gas heaters, close the gas supply before covering, and follow the maker's instructions.

Fabric and build

Thin polyester covers tend to fail in the same ways: the fabric chalks in the sun, the elastic hem stretches out, and the seam at the reflector dish splits in a hard freeze. Our waterproof PVC-coated polyester is built against that. The weight resists cracking at fold lines, the PVC coating stays flexible through freeze-thaw cycles, and the UV-stabilized treatment helps it hold its color.

The details that matter on a heater:

  • A reinforced top panel where the cover sits on the reflector dish
  • A drawstring, or a grommet-and-bungee hem, at the base so the cover stays on in wind
  • Vented top panels, so humidity trapped against the mast can rise out
  • Double-stitched seams along the column

ZIP Armor handles the climates that are hardest on heaters: coastal salt air, deep-winter freeze-thaw, and strong sun all year. It carries an up to 10-year warranty. ZIP Shield handles moderate climates and heaters under pergolas and covered decks. It carries a 7-year warranty.

Use cases and weather

A heater stands outside through every season it is not in use:

  • Rain that reaches the burner, igniter and controls
  • Sun that fades the finish and wears on glass-tube seals
  • Salt air on coastal patios
  • Snow, ice and freeze-thaw through winter
  • Dust, pollen, leaves and insects in the controls and reflector
  • Wind that tips light covers off

A waterproof, fitted cover keeps the heater clean and dry and ready for the next cool evening.

Warranty and our promise

ZIP Armor covers carry an up to 10-year warranty and ZIP Shield covers carry a 7-year warranty. Each cover is made to the measurements you send and backed by our Protection Guaranteed promise.

Patio heater cover sizes, shapes and variants

Because each cover is made to order, you are not limited to a size chart. This collection includes:

  • Tower and mushroom patio heater covers
  • Column and pyramid heater covers
  • Wall-mounted infrared heater covers
  • Electric infrared wall-mounted heater covers

This collection is for heaters that warm an outdoor space. A water heater cover for a tank or tankless unit is a different project, so measure that separately and tell us what it is.

Frequently Asked Questions

5 Easy Ordering Steps

Choose your product, input dimensions, select fabric, personalize, review your order & place your order!

1
Measure Measure
2
Choose Choose Fabric
3
Personalize Personalize
4
Measure Review
5
Order Place Order