
From simple silhouettes to complex designs — any shape, any size, any style, we bring your perfect custom design to life. And if you’re looking for something truly unique, just give us a call at +1 720-882-0756. Our team will be happy to help you create almost any custom shape you can imagine!
A pressure washer cover should follow the outline of your machine, clear the hose reel, the wand holster and the pull-cord housing, and let the pump and engine dry out underneath. ZIPCovers makes each cover to your measurements in PVC-coated polyester, waterproof. ZIP Armor carries an up to 10-year warranty and ZIP Shield a 7-year warranty.
This collection is for pressure washers in seven different configurations: machines with a hose reel, gas-powered machines without a reel, portable electric units, heavy-duty gas machines, compact units, standard electric machines and rolling electric machines. A pressure washer cover and a power washer cover are the same product under different names.
Each cover is patterned to your machine's actual outline. The hose reel is included, the wand holster is cleared, and the pull-cord housing is wrapped. Machines with the same pressure rating can have very different footprints, and engines of similar size can sit at different heights, so we cut every cover to measurements.
These covers are for the homeowner who washes decks, driveways and siding a few times a year, the contractor who has a pressure washer in a truck and/or jobsite trailer, and anyone who stores a pressure washer outdoors, under a carport, shed or garage.
A pressure washer often sits unused for months between jobs. Damp and dust reach the pump, the inlet and the connections, and a machine used only in spring and autumn can be hard to start by the third use. A cover with vented top panels lets the pump area and the engine bay dry out after the machine has been used, while the waterproof fabric keeps rain and dust off.
First, determine what type of machine you have. The fabric is the same on all seven covers with different designs on each.
Write the numbers down and note which is which. If you are unsure, send us a photo of the machine with the tape in view. We would rather confirm a number than make a cover twice.
Every cover is waterproof PVC-coated polyester. The heavier fabric resists tearing at the wand holster and the hose reel guide, the spots where a cover bends sharpest against metal. The PVC coating stays flexible through freeze-thaw cycles in garage and shed storage, and the UV-inhibited coating holds its color.
The build details:
ZIP Armor is for contractor storage, jobsite trailers and outdoor storage in extreme climates. It has a 10 year warranty. ZIP Shield is for homeowner shed and garage storage in moderate climates. It has a 7 year warranty.
The workshop and weather beat on a pressure washer:
Covering your pressure washer with a fitted waterproof cover keeps it clean and dry for the next job.
Cool the engine first and remove fuel spills before covering. Never cover a running machine. Before freezing weather, follow the maker's manual for draining and winterizing the pump.
Between jobs, let the machine dry, coil the hose and refit the cover to keep the pump and connections out of the damp. Lift the cover to check for mice and standing water.
At the end of the season, clean and dry both the machine and the pressure washer cover before storage. Follow the maker's manual for fuel, oil and pump winterizing, then fit the cover with the hem snug at the base. In a trailer or truck bed, tie the machine down first and check that the cover is not rubbing against a sharp edge. A pressure washer cover that goes back on after every job keeps the machine ready for spring.
ZIP Armor covers have an up to 10-year warranty and ZIP Shield covers have a 7-year warranty. Each cover is made to the measurements you provide, and is backed by our Protection Guaranteed promise.
Choose your product, input dimensions, select fabric, personalize, review your order & place your order!
Review