
From simple silhouettes to complex designs — any shape, any size, any style, we bring your perfect custom design to life. And if you’re looking for something truly unique, just give us a call at +1 720-882-0756. Our team will be happy to help you create almost any custom shape you can imagine!
A snow blower cover has to stay flexible in hard cold, fit close around the auger housing and chute, and stay tight to the chassis in winter wind. ZIPCovers makes each cover to your measurements in PVC-coated polyester, waterproof and made to stay flexible below freezing. ZIP Armor carries an up to 10-year warranty and ZIP Shield a 7-year warranty.
This collection is for snowblowers of every type: two-stage and three-stage gas machines, single-stage machines, and cordless battery-powered units. Each cover is cut to the length, width and height of your machine, with room for the chute, the handles and the controls.
A snowblower spends half the year working in the snow and half the year waiting for it. Through winter it sits wet between storms. Through the off-season it sits in a shed, a carport or a corner of the garage, where dust, sun, rain and mice can reach it. A loose tarp leaves the auger and the engine open at the base and blows off in the first strong wind.
Our covers are for property and maintenance personnel with several machines to look after and for homeowners with machines stored outdoors or in a carport.
Start with the type of machine.
Then consider where the machine is stored. A heavy duty snow blower cover in ZIP Armor is for a machine stored outside, or under a carport. A cover in ZIP Shield is for a machine stored in a shed or unheated garage.
Machines with the same clearing width are not the same shape. Two 24-inch machines from different makers can differ in height, handle shape and chute position. That is why every cover for snowblower models in this collection is made to measurements, not to a size label.
Write the numbers down and note which is which. If you are unsure, send us a photo of the machine with the tape in view. We would rather confirm a number than make a cover twice.
Every snowblower cover is waterproof PVC-coated polyester with a coating made to stay flexible in cold weather. The heavier coating holds its elasticity below freezing, and the heavier fabric resists crease damage where the cover bends sharpest around the auger housing. The coating is UV-inhibited and fade-resistant.
The build is planned for a snowblower:
ZIP Armor is for outdoor and carport storage, with the machine sitting in direct weather. It carries an up to 10-year warranty. ZIP Shield is for shed and unheated-garage storage, where the snowblower sees indirect weather. It carries a 7-year warranty.
A snowblower faces the weather all year:
A fitted, waterproof cover keeps the machine clean and dry, so it starts and clears when the next storm comes.
Cool a gas engine before putting the cover on, and never cover a still hot engine. Wipe up fuel spills first. Store fuel away from the engine, as the fuel can advises. For a cordless machine, follow the manufacturer's advice on battery storage.
During the winter, brush the loose snow off the machine after each use and let it drip for a few minutes before you cover it. Pull the cover over the auger housing first then over the handles and tighten the hem at the bottom.
At the end of the season:
Check the cover once a month through the off-season, and shake off leaves and standing water. A snow blower cover that is kept clean and dry is ready to go back on after the first storm of the next winter.
ZIP Armor covers have an up to 10-year warranty and ZIP Shield covers have a 7-year warranty. Each cover is made to your measurements and is backed by our Protection Guaranteed Promise.
Every cover is cut to order. Therefore, you are not limited to a size chart. This collection includes covers for:
Choose your product, input dimensions, select fabric, personalize, review your order & place your order!
Review