Custom Patio Furniture Covers - Handcrafted for Any Shape & Size

Heavy-Duty Custom Outdoor Furniture Covers Built to Last

Engineered to Fit Right: Custom Patio Covers, Made to Last for Years

Custom patio furniture covers engineered for maximum protection. From outdoor sofas and sectionals to grills and fire pits- we craft covers that shield your furniture year-round. Waterproof fabrics, reinforced seams, and custom-sizing ensure your outdoor furniture stays clean, dry, and pristine season after season.

Made-to-Fit Custom Patio Covers

Why settle for baggy, ill-fitted, generic covers when you can have custom covers based on the exact size of your furniture? Invest in custom furniture covers that not only claim to fit but actually fit snugly and securely. These waterproof custom patio furniture covers provide unmatched performance and durability, protecting against all weather conditions. Choose the weight that matches your climate: ZIP Armor at 18 oz, 1000 Denier for harsh, year-round exposure, or ZIP Shield at 12 oz for moderate weather and covered patios. Both are 100% waterproof, both are cut to your exact measurements, and both are built with UV-inhibited dye and reinforced, double-stitched seams.

Custom Covers vs. Generic Covers: Why Exact Fit Matters for Patio Longevity

A generic patio cover is sized to a chart, not to your furniture, so it arrives slack in at least one direction — and slack is where covers fail. Across the broad, flat top of a sofa or a dining table, loose fabric sags into a shallow basin. Rain collects in the dip rather than running off it, and standing water is heavy: enough of it will stretch the seams, pull the hem up off the legs, and press wet fabric down onto the cushions it was supposed to be keeping dry.

The furniture pays for that, not just the cover. A cover that lifts in wind leaves aluminum joints and steel hardware exposed to rain long enough to corrode, traps humidity against cushion foam until it goes musty, and lets UV back onto teak, wicker and powder-coated frames — which is what fades and cracks them years earlier than they should. Replacing a cover every season is the small cost. Replacing the patio set is the real one.

An exact-fit cover closes that gap in three places at once: the top panel stays taut so water runs off the pitch of the furniture, the hem pulls in under the frame so wind has no opening to catch, and the vents let humidity out instead of sealing it in. Side by side, the difference looks like this:

A Close Comparison

Choose Your Armor: ZIP Armor vs ZIP Shield

Both of our patio furniture cover fabrics are 100% waterproof PVC-coated polyester — the choice between them is weight and climate, not quality. ZIP Armor is the 18 oz, 1000 Denier build, carrying a 10-year warranty. ZIP Shield is the 12 oz build, carrying 7 years. Both are UV-stabilized against fade and cracking, both are air-vented, both are finished with reinforced double-stitched seams, and both are cut to your measurements rather than to a size chart.

Choose ZIP Armor if the patio set lives fully exposed and stays out all year — intense summer sun, driving rain, snow load through winter, and wind strong enough to test every strap. It is the heavier fabric to handle, and it is the one to specify for large sectionals and dining sets that never come indoors.

Choose ZIP Shield if the furniture sits under a pergola, a covered porch or a deep overhang, or if your weather runs to regular rain and mild winters rather than extremes. The lighter fabric is easier to fit and fold on a big set, and you are not paying for protection your climate never asks for.

How the two compare with a big-box cover:

• ZIP Armor — 18 oz, 1000 Denier, fully waterproof PVC coating, UV-inhibited dye, 10-year warranty
• ZIP Shield — 12 oz, fully waterproof PVC coating, UV-inhibited dye, 7-year warranty
• Generic patio cover — 8 to 12 oz, usually uncoated and only water-resistant, one-size-fits-all cut, little or no warranty

Whichever you choose, the construction underneath is the same: a true waterproof coating rather than a shower-resistant finish, built-in air vents that let humidity escape instead of trapping mildew against your cushions, sewn-in handles heavy enough to pull a wet cover off a large sectional, and drawstrings, grommets and straps to anchor it through a windy night.

What Makes Our Patio Furniture Covers Different?

Made for Every Shape and Size

From L-shaped sectionals and chaise lounges to fire pits, grills, and outdoor bar sets, no matter how complex or unique the shape, we tailor each piece to fit snug and secure. No more loose, flapping covers that slip off in the wind. Each cover is made to your exact measurements, ensuring a secure fit that stays put through every storm. Covering one piece rather than the whole patio? Our custom grill covers are cut to the same standard, and our sectional sofa covers handle the long, awkward runs that stock sizes never reach.

Built for Year-Round Protection

Crafted from waterproof, UV-resistant, and abrasion-tested fabric, our covers are built to handle it all. From rain, sun, snow, or wind, our covers defend outdoor furniture against fading, cracking, rust, and moisture damage throughout the year. The reinforced stitching ensures long-term durability and dependability in any climate.

Smart Design Details That Make a Difference

We believe in thinking beyond the basics. Drawstrings, grommets and buckle straps keep the cover anchored where you put it. Built-in air vents let humidity escape so condensation never turns into mildew underneath. Reinforced, double-stitched seams hold under load, and sewn-in handles make a large, wet cover manageable for one person — all of it aimed at extending your furniture's life, not just the cover's.

Up to 10-Year Warranty & Free Shipping

Every ZIP Armor cover carries a 10-year warranty and every ZIP Shield cover a 7-year warranty — our promise of high performance, durability, and longevity on every custom patio cover we make. Plus, all orders ship free, with expert support available every step of the way.

How to Order Custom Patio Covers in 3 Easy Steps

Ordering a made-to-measure cover takes about five minutes and one tape measure.

Step 1 — Measure your furniture. Take the length, width and height at the widest and tallest points, measuring the furniture itself rather than an old cover. Send us the exact numbers: do not round up or add slack, because the fit allowance is built in during production.

Step 2 — Choose your fabric and finishing. Pick ZIP Armor for harsh, year-round exposure or ZIP Shield for moderate weather, then add the tie-downs your site needs — drawstrings, grommets, straps or an elastic hem — plus handles for anything large enough to be awkward.

Step 3 — Review and place your order. Our design team checks every set of dimensions before the fabric is cut, and for an unusual or built-in piece you can upload a photo while customizing. Shipping is free.