{"title":"Custom Log Splitter Covers","description":"\u003cdiv class=\"zc-desc\"\u003e\n\u003cp\u003eA log splitter cover has to stand up to a sharp wedge, keep rain off the I-beam and the hydraulic cylinder, and stay put through a winter at the wood pile. ZIPCovers makes each cover to your measurements in PVC-coated polyester, waterproof. ZIP Armor carries an up to 10-year warranty and ZIP Shield a 7-year warranty.\u003c\/p\u003e\n\u003cdetails class=\"zc-acc zc-acc-h2\"\u003e\u003csummary\u003e\u003ch2\u003eWhat this collection covers and who it is for\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"zc-acc-body\"\u003e\n\u003cp\u003eThis collection is for the four types of log splitters: horizontal and vertical gas splitters, electric splitters, dual action splitters and kinetic gas splitters. Each cover is made to the specific dimensions of your machine, including the wedge, engine, cylinder, and tow hitch.\u003c\/p\u003e\n\u003cp\u003eA splitter usually lives where the wood is: at the wood pile, in a side yard, under a tree or beside the lot. That spot sees the weather full-strength. Rain, snow, freeze-thaw, sun and sap dripping from above all reach the machine. Once rain sits on the beam, rust starts.\u003c\/p\u003e\n\u003cp\u003eThis is for folks that split their own firewood, small farms and woodlots, and firewood businesses that have an outside splitter between jobs.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails class=\"zc-acc zc-acc-h2\"\u003e\u003csummary\u003e\u003ch2\u003eHow to choose a wood splitter cover by type\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"zc-acc-body\"\u003e\n\u003cp\u003eStart with the type of splitter. It is the same fabric in four cut patterns.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHorizontal and vertical gas splitters. The largest towable machines, with a gas engine, a hydraulic pump and a long beam. The cover runs the full length of the beam and drops over the engine.\u003c\/li\u003e\n\u003cli\u003eElectric log splitters. Smaller, cord-powered splitters, usually 5 to 7 tons, with no gas engine. They fit on a workbench or in a corner of the shed. The cover is shorter and lighter, with a sealed back panel where the power cord exits.\u003c\/li\u003e\n\u003cli\u003eDual action splitters. Machines that split on both the forward and the return stroke, with a wedge at each end. The cover is cut for both ends.\u003c\/li\u003e\n\u003cli\u003eKinetic gas splitters. Flywheel machines with a different body shape from hydraulic splitters. The cover follows the flywheel housing.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTonnage does not set the size. A 22-ton and a 27-ton splitter often share the same frame size, and a 27-ton splitter from one maker can be longer than a 35-ton splitter from another. That is why every heavy duty log splitter cover in this collection is cut to your measurements, not to a tonnage label.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails class=\"zc-acc zc-acc-h2\"\u003e\u003csummary\u003e\u003ch2\u003eHow to measure for a log splitter cover\u003c\/h2\u003e\u003c\/summary\u003e\u003cdiv class=\"zc-acc-body\"\u003e\n\u003col\u003e\n\u003cli\u003eLet the engine cool fully before you measure or cover the machine.\u003c\/li\u003e\n\u003cli\u003eMeasure the full length from the tow hitch to the far end of the beam.\u003c\/li\u003e\n\u003cli\u003eMeasure the width at the widest point, usually across the engine or the wheels.\u003c\/li\u003e\n\u003cli\u003eMeasure the height from the ground to the highest point, usually the engine or the wedge.\u003c\/li\u003e\n\u003cli\u003eIf the splitter can stand vertical, tell us whether you store it horizontal or vertical.\u003c\/li\u003e\n\u003cli\u003eNote the wedge, handles, log cradles and anything that sticks out.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eWrite the numbers down. If unsure, take a picture of the splitter with the tape in view. We would rather confirm a number than cover it twice.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails class=\"zc-acc zc-acc-h3\"\u003e\u003csummary\u003e\u003ch3\u003eFabric and build\u003c\/h3\u003e\u003c\/summary\u003e\u003cdiv class=\"zc-acc-body\"\u003e\n\u003cp\u003eEvery cover is waterproof PVC-coated polyester. The heavy fabric stands up to sharp metal contact at the wedge, which is the point that sees the most wear on a splitter cover. It is waterproof, the coating is UV-stabilized and does not chalk in sun, and the seams stay sealed through hard freeze cycles.\u003c\/p\u003e\n\u003cp\u003eThe build is planned for a splitter:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA drawstring or grommet-and-bungee hem at the base, so the cover stays put in wind\u003c\/li\u003e\n\u003cli\u003eDouble stitching down the length of the spine\u003c\/li\u003e\n\u003cli\u003eVented top panels, so humidity rises out instead of condensing on the hydraulic cylinder\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eZIP Armor is for splitters stored outside year-round, at the wood pile or in a side yard. It carries an up to 10-year warranty. ZIP Shield is for shed storage with seasonal outdoor use. It carries a 7-year warranty.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails class=\"zc-acc zc-acc-h3\"\u003e\u003csummary\u003e\u003ch3\u003eUse cases and weather\u003c\/h3\u003e\u003c\/summary\u003e\u003cdiv class=\"zc-acc-body\"\u003e\n\u003cp\u003eThe wood splitter faces the elements every day:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRain that sits on the beam and starts rust\u003c\/li\u003e\n\u003cli\u003eSnow and freeze-thaw through winter\u003c\/li\u003e\n\u003cli\u003eSun that fades paint and cracks hoses and plastic parts\u003c\/li\u003e\n\u003cli\u003eSap, leaves and bark dropping from trees above\u003c\/li\u003e\n\u003cli\u003eSawdust and wood chips packed around the engine\u003c\/li\u003e\n\u003cli\u003eWind that lifts loose covers off the wedge\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA snug, waterproof cover keeps the machine clean and dry for the next time it is used.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails class=\"zc-acc zc-acc-h3\"\u003e\u003csummary\u003e\u003ch3\u003eSafe use\u003c\/h3\u003e\u003c\/summary\u003e\u003cdiv class=\"zc-acc-body\"\u003e\u003cp\u003eCool the engine before covering. Clean up spilled fuel and hydraulic fluid. Do not cover a running splitter. Follow the manufacturer’s guidelines for storage and maintenance.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails class=\"zc-acc zc-acc-h3\"\u003e\u003csummary\u003e\u003ch3\u003eBetween jobs and through the off-season\u003c\/h3\u003e\u003c\/summary\u003e\u003cdiv class=\"zc-acc-body\"\u003e\n\u003cp\u003eA few minutes at the end of each splitting session keeps the machine and the cover in good shape. Knock bark, wood chips and sawdust off the beam and the engine, and let the engine cool. Lower the wedge to its resting position, then fit the cover from the hitch end back over the beam.\u003c\/p\u003e\n\u003cp\u003eBefore a long off-season:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eClean the machine and let it dry fully.\u003c\/li\u003e\n\u003cli\u003eWipe up any fuel or hydraulic fluid.\u003c\/li\u003e\n\u003cli\u003eFit the cover and tighten the hem at the base.\u003c\/li\u003e\n\u003cli\u003eCheck that the vented panels sit on top, above the cylinder.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThrough the winter, brush snow and fallen leaves off the top of the cover after a storm, and check now and then that it has not shifted on the wedge. A log splitter cover that is kept clean and dry is ready to come off as soon as the next load of wood arrives.\u003c\/p\u003e\n\u003c\/div\u003e\u003c\/details\u003e\u003cdetails class=\"zc-acc zc-acc-h4\"\u003e\u003csummary\u003e\u003ch4\u003eWarranty and our promise\u003c\/h4\u003e\u003c\/summary\u003e\u003cdiv class=\"zc-acc-body\"\u003e\u003cp\u003eZIP Armor covers come with an up to 10-year warranty and ZIP Shield covers a 7-year warranty. Each cover is made to your size and is backed by our Protection Guaranteed promise.\u003c\/p\u003e\u003c\/div\u003e\u003c\/details\u003e\u003cdetails class=\"zc-acc zc-acc-h4\"\u003e\u003csummary\u003e\u003ch4\u003eSizes, shapes and variants\u003c\/h4\u003e\u003c\/summary\u003e\u003cdiv class=\"zc-acc-body\"\u003e\n\u003cp\u003eEvery cover is cut to order, so you are not limited to a size chart. Jobs this collection covers include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTowable horizontal and vertical gas splitters\u003c\/li\u003e\n\u003cli\u003eElectric splitters on a bench or a stand\u003c\/li\u003e\n\u003cli\u003eDual action splitters with two wedges\u003c\/li\u003e\n\u003cli\u003eKinetic flywheel splitters\u003c\/li\u003e\n\u003cli\u003eSplitters of any tonnage, from small electric units to large towable machines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\u003c\/details\u003e\n\u003c\/div\u003e","products":[{"product_id":"custom-log-splitter-covers-kinetic-gas-log-splitter","title":"Custom Log Splitter Covers - Kinetic Gas Log Splitter","description":"\u003cdiv class=\"descTab\"\u003eDescription\u003c\/div\u003e\n\u003cp\u003eChoosing log splitter covers kinetic gas splitters can wear for years starts with the flywheel cage, not just the I-beam. A kinetic splitter's cage sits higher and wider than the beam, so the cover must reach over it. ZIPCovers makes each cover to your machine's measurements in waterproof 18 oz\/12 oz 1000 Denier PVC-coated polyester, backed by a up to 10-year warranty.\u003c\/p\u003e\n\n\u003ch2\u003eWhat this cover is and who it is for\u003c\/h2\u003e\n\u003cp\u003eA kinetic gas splitter stores energy in spinning flywheels and releases it in a fast stroke, which gives it its quick cycle times. Its weak points are the flywheel cage, the drive belt and the I-beam. Left uncovered, moisture gets into the flywheel cage and the beam rusts. Stock covers often do not reach over the cage, and they tear where they stretch across it.\u003c\/p\u003e\n\u003cp\u003eThis cover is tailored to your kinetic splitter's dimensions and follows its outline, including the flywheel cage, with no sagging and no bunching. It is for homeowners, farms and commercial firewood operations that store kinetic splitters in yards, sheds, barns or on trailers.\u003c\/p\u003e\n\n\u003ch2\u003eMeasuring for log splitter covers kinetic gas models\u003c\/h2\u003e\n\u003cp\u003eLet the engine cool and the flywheels stop completely, then measure in inches with a metal tape.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eLength: from the front of the beam or tongue to the back of the machine.\u003c\/li\u003e\n  \u003cli\u003eWidth: across the widest point, usually the flywheel cage or the wheels.\u003c\/li\u003e\n  \u003cli\u003eHeight: from the ground to the highest point, usually the flywheel cage or the engine.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eRound each number up to the nearest half inch. Note the cage position and any log tables or attachments that stay on the machine.\u003c\/p\u003e\n\n\u003ch3\u003eWeather and where to use it\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eWood lots and yards where the splitter stays out between jobs\u003c\/li\u003e\n  \u003cli\u003eSheds and barns, where damp and dust settle on the cage and belt\u003c\/li\u003e\n  \u003cli\u003eTrailers and farm sites, where the machine moves often\u003c\/li\u003e\n  \u003cli\u003eOff-season storage, when the splitter sits for months\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn summer, the cover blocks UV that dries out the belt and hoses. In wet months, it keeps rain out of the flywheel cage. In winter, it keeps snow and ice off the engine and beam. Made-to-measure log splitter covers kinetic gas machines need are cut to clear the cage, which a stock cover does not.\u003c\/p\u003e\n\n\u003ch3\u003eCare and storage\u003c\/h3\u003e\n\u003cp\u003eNever cover a hot engine or a machine with spinning flywheels. Hand-wash the cover and let it air-dry completely before the next use. Brush off bark, sawdust and leaves. When the cover is not in use, fold it and store it in a moisture-proof container.\u003c\/p\u003e\n\n\u003ch4\u003eWarranty and our promise\u003c\/h4\u003e\n\u003cp\u003eThe cover is backed by a up to 10-year warranty. It is made to the measurements you send. Protection Guaranteed.\u003c\/p\u003e\n\n\u003cdiv class=\"descTab\"\u003eFabrics Information\u003c\/div\u003e\n\n\u003ch3\u003eFabric and build\u003c\/h3\u003e\n\u003cp\u003eThe cover is made from heavy-duty 18 oz\/12 oz, 1000 Denier PVC-coated polyester, built to handle harsh weather without cracking or fading. It is waterproof, UV-stabilized and weather-resistant in extreme temperatures. The PVC coating protects against UV, rain and snow, so the splitter comes out of the off-season in the same shape it went in.\u003c\/p\u003e\n\u003cp\u003eAir vents release trapped air and moisture, which helps prevent mold, mildew and condensation around the flywheels and belt. Reinforced seams help the cover hold up. Dual handles make it easy to put on and take off, and optional drawstrings add wind security on exposed sites.\u003c\/p\u003e\n\n\u003cdiv class=\"descTab\"\u003eFeature Highlights\u003c\/div\u003e\n\u003cul\u003e\n  \u003cli\u003eCustom-made to any size, style, or shape\u003c\/li\u003e\n  \u003cli\u003eMade with heavy-duty PVC-coated Polyester\u003c\/li\u003e\n  \u003cli\u003eWeatherproof \u0026amp; UV-resistant\u003c\/li\u003e\n  \u003cli\u003eBreathable, ventilated design\u003c\/li\u003e\n  \u003cli\u003eSeamless handling and upkeep\u003c\/li\u003e\n  \u003cli\u003eFunctional \u0026amp; operational design\u003c\/li\u003e\n  \u003cli\u003eDesigned for longevity, 10-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZIPCovers","offers":[{"title":"Default Title","offer_id":47403572134055,"sku":"Custom-Log-Splitter-Covers---Kinetic-Gas-Log-Splitter","price":132.3,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/6260\/5223\/files\/CustomLogSplitterCovers-KineticGasLogSplitter.webp?v=1783400899"},{"product_id":"custom-log-splitter-covers-dual-action-log-splitter","title":"Custom Log Splitter Covers - Dual Action Log Splitter","description":"\u003cdiv class=\"descTab\"\u003eDescription\u003c\/div\u003e\n\u003cp\u003eChoosing log splitter covers dual action splitters can wear for years starts with the full I-beam length and both wedge ends. A dual-action splitter splits on the push and the return stroke, so both ends take wear. ZIPCovers makes each cover to your machine's measurements in waterproof 18 oz\/12 oz 1000 Denier PVC-coated polyester, with air vents and handles, backed by a up to 10-year warranty.\u003c\/p\u003e\n\n\u003ch2\u003eWhat this cover is and who it is for\u003c\/h2\u003e\n\u003cp\u003eA dual-action splitter has a wedge at each end of the I-beam and a hydraulic cylinder that works in both directions. Left uncovered, the I-beam rusts and the hydraulic cylinder corrodes. Stock covers tear at the two wedge ends, and baggy ones let rain in.\u003c\/p\u003e\n\u003cp\u003eThis cover is tailored to your splitter's dimensions and follows its outline, with no sagging and no bunching. It is for homeowners, farms and commercial firewood operations that store dual-action splitters in yards, sheds, barns or on trailers between uses.\u003c\/p\u003e\n\n\u003ch2\u003eMeasuring for log splitter covers dual action models\u003c\/h2\u003e\n\u003cp\u003eLet the engine and flywheels cool to a stop, then measure with a metal tape.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003eLength: from the tip of one wedge to the tip of the other, along the full I-beam.\u003c\/li\u003e\n  \u003cli\u003eWidth: across the widest point, usually the engine, wheels or log cradles.\u003c\/li\u003e\n  \u003cli\u003eHeight: from the ground to the highest point, usually the engine or the beam in its working position.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eRound each number up to the nearest half inch. Measure with any attachment that stays on the splitter, such as a multi-way wedge, in place. Note the hitch and tongue if you want them covered. If the beam tilts for vertical splitting and you store it upright, measure it in that position instead and say so in the order notes.\u003c\/p\u003e\n\n\u003ch3\u003eWeather and where to use it\u003c\/h3\u003e\n\u003cul\u003e\n  \u003cli\u003eWood lots and yards where the splitter stays out between jobs\u003c\/li\u003e\n  \u003cli\u003eSheds and barns, where damp and dust build up\u003c\/li\u003e\n  \u003cli\u003eTrailers and farm sites, where the machine moves often\u003c\/li\u003e\n  \u003cli\u003eOff-season storage, when the splitter sits for months\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIn summer, the cover blocks UV that dries out hoses and seals. In wet months, it keeps rain off the beam and cylinder. In winter, it keeps snow and ice off the engine and controls. Reinforced log splitter covers dual action machines use are worth it because both wedge ends take the same wear.\u003c\/p\u003e\n\n\u003ch3\u003eCare and storage\u003c\/h3\u003e\n\u003cp\u003eNever cover a hot engine. Hand-wash the cover and let it air-dry completely before the next use. Brush off bark, sawdust and leaves. Wipe off oil and wood sap from the beam before covering, so it does not transfer onto the fabric. When the cover is not in use, fold it and store it in a moisture-proof container.\u003c\/p\u003e\n\n\u003ch4\u003eWarranty and our promise\u003c\/h4\u003e\n\u003cp\u003eThe cover is backed by a up to 10-year warranty. It is made to the measurements you send. Protection Guaranteed.\u003c\/p\u003e\n\n\u003cdiv class=\"descTab\"\u003eFabrics Information\u003c\/div\u003e\n\n\u003ch3\u003eFabric and build\u003c\/h3\u003e\n\u003cp\u003eThe cover is made from heavy-duty 18 oz\/12 oz, 1000 Denier PVC-coated polyester, built to handle harsh weather without cracking or fading. It is waterproof, UV-stabilized and weather-resistant in extreme temperatures. The PVC coating protects against UV, rain and snow, so the splitter comes out of the off-season in the same shape it went in.\u003c\/p\u003e\n\u003cp\u003eAir vents release trapped air and moisture, which helps prevent mold, mildew and condensation on the beam and cylinder. Reinforced seams help the cover hold up. Dual handles make it easy to put on and take off, and optional drawstrings add wind security on exposed sites.\u003c\/p\u003e\n\n\u003cdiv class=\"descTab\"\u003eFeature Highlights\u003c\/div\u003e\n\u003cul\u003e\n  \u003cli\u003eCustom-made to any size, style, or shape\u003c\/li\u003e\n  \u003cli\u003eMade with heavy-duty PVC-coated Polyester\u003c\/li\u003e\n  \u003cli\u003eWeatherproof \u0026amp; UV-resistant\u003c\/li\u003e\n  \u003cli\u003eBreathable, ventilated design\u003c\/li\u003e\n  \u003cli\u003eSeamless handling and upkeep\u003c\/li\u003e\n  \u003cli\u003eFunctional \u0026amp; operational design\u003c\/li\u003e\n  \u003cli\u003eDesigned for longevity, 10-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZIPCovers","offers":[{"title":"Default Title","offer_id":47403572199591,"sku":"Custom-Log-Splitter-Covers---Dual-Action-Log-Splitter","price":136.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/6260\/5223\/files\/CustomLogSplitterCovers-DualActionLogSplitter.webp?v=1783400788"},{"product_id":"custom-log-splitter-covers-electric-log-splitter","title":"Custom Log Splitter Covers - Electric Log Splitter","description":"\u003cdiv class=\"descTab\"\u003eDescription\u003c\/div\u003e\n\u003cp\u003eA champion log splitter cover from ZIPCovers is made to your electric log splitter's own length, width and height, so it covers the motor housing, beam and wedge without sagging or bunching. It is made from heavy-duty 18 oz\/12 oz 1000 Denier PVC-coated polyester that is waterproof and UV-stabilized, with air vents, and it is backed by a up to 10-year warranty.\u003c\/p\u003e\n\n\u003ch2\u003eWhat it is and who it is for\u003c\/h2\u003e\n\u003cp\u003eAn electric log splitter handles firewood without a gas engine to look after, but it still needs protecting. Damp gets into the motor housing, the wedge and beam rust, and dust and sawdust settle in every gap. A universal cover is usually cut for a larger gas splitter, so on a compact electric model it sags, holds water and blows off.\u003c\/p\u003e\n\u003cp\u003eThese covers are made to order for electric log splitters, including:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eCompact electric splitters on a stand or workbench\u003c\/li\u003e\n  \u003cli\u003eHorizontal electric splitters with wheels\u003c\/li\u003e\n  \u003cli\u003eSplitters stored in a garage corner, shed or covered porch\u003c\/li\u003e\n  \u003cli\u003eSplitters used once or twice a season and stored the rest of the year\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThey suit homeowners who split their own firewood and want the splitter clean and ready. Because each cover starts from your numbers, it suits electric splitters of any make.\u003c\/p\u003e\n\n\u003ch2\u003eMeasuring for a champion log splitter cover\u003c\/h2\u003e\n\u003cp\u003eMeasure the splitter itself, at its widest points, in the position you store it:\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength.\u003c\/strong\u003e From the end of the beam to the far end of the motor housing, including any handle that sticks out.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth.\u003c\/strong\u003e Across the widest part, usually the motor housing, the log cradle or the wheels.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight.\u003c\/strong\u003e From the floor or workbench to the highest point, usually the motor housing or the control handle.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDrop.\u003c\/strong\u003e How far down the sides you want the cover to reach.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eRound each figure up to the nearest half inch. If the splitter sits on a stand, measure the splitter only, or the splitter and stand together, depending on what you want covered. A cover made from these numbers sits close to the splitter, with no loose fabric to drag or catch wind.\u003c\/p\u003e\n\n\u003ch3\u003eWeather and where to use it\u003c\/h3\u003e\n\u003cp\u003eElectric splitters are often stored in garages and sheds, where damp air, condensation and dust do the damage. Splitters kept on a covered porch or beside a woodpile also face blown rain and sun. A waterproof cover keeps water off the motor and metal, and the vents let air move so condensation does not build up underneath.\u003c\/p\u003e\n\u003cp\u003eGood places to use this cover:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eGarage corners and workbenches\u003c\/li\u003e\n  \u003cli\u003eGarden sheds and outbuildings\u003c\/li\u003e\n  \u003cli\u003eCovered porches and carports\u003c\/li\u003e\n  \u003cli\u003eBeside a woodpile or firewood rack\u003c\/li\u003e\n  \u003cli\u003eOff-season storage\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eBefore you cover the splitter\u003c\/h3\u003e\n\u003cp\u003eA few minutes of prep makes the cover work better. Let the motor cool after use, wipe sawdust and bark off the beam and wedge, and check for hydraulic oil drips so they do not sit under the cover. If the splitter has been out in the rain, let it dry first. Then unplug it, coil the cord, and pull the cover on from the front using the side handles.\u003c\/p\u003e\n\n\u003ch3\u003eCare and storage\u003c\/h3\u003e\n\u003cp\u003eBrush off sawdust, bark and dirt, then wipe the cover with mild soap and water and rinse it. Let it air-dry completely before you put it back on or fold it. When you are not using the cover, fold it dry and store it in a moisture-proof container.\u003c\/p\u003e\n\n\u003ch4\u003eWarranty\u003c\/h4\u003e\n\u003cp\u003eEvery cover is backed by a up to 10-year warranty and supported by our Protection Guaranteed promise.\u003c\/p\u003e\n\n\u003ch4\u003eModel fit: makes and models\u003c\/h4\u003e\n\u003cp\u003eBecause each cover is made to the measurements you send, it is not limited to one make. A champion log splitter cover, for example, is made by measuring your Champion electric splitter and sending the numbers, the same way as for any other model. The fit comes from your measurements, not from a model list. ZIPCovers is not affiliated with any log splitter maker.\u003c\/p\u003e\n\n\u003cdiv class=\"descTab\"\u003eFabrics Information\u003c\/div\u003e\n\n\u003ch3\u003eFabric and build\u003c\/h3\u003e\n\u003cp\u003eEach cover is made from heavy-duty 18 oz\/12 oz 1000 Denier PVC-coated polyester, built to endure harsh weather without cracking or fading.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWaterproof.\u003c\/strong\u003e Keeps rain, drips and damp off the motor housing, beam and wedge.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUV-stabilized.\u003c\/strong\u003e Protects the splitter and its plastic parts from sun.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeather-resistant.\u003c\/strong\u003e Holds up in extreme temperatures, beside its waterproof protection.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAir vents.\u003c\/strong\u003e Release trapped air and moisture, which helps prevent condensation, mold and mildew.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReinforced seams.\u003c\/strong\u003e Help keep the splitter dry inside.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual side handles.\u003c\/strong\u003e Make it easier to put the cover on and take it off.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptional drawstrings and grommets.\u003c\/strong\u003e Add security in heavy wind.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"descTab\"\u003eFeature Highlights\u003c\/div\u003e\n\u003cul\u003e\n  \u003cli\u003eCustom-made to any size, style, or shape\u003c\/li\u003e\n  \u003cli\u003eMade with heavy-duty PVC-coated Polyester\u003c\/li\u003e\n  \u003cli\u003eWeatherproof \u0026amp; UV-resistant\u003c\/li\u003e\n  \u003cli\u003eBreathable, ventilated design\u003c\/li\u003e\n  \u003cli\u003eSeamless handling and upkeep\u003c\/li\u003e\n  \u003cli\u003eFunctional \u0026amp; operational design\u003c\/li\u003e\n  \u003cli\u003eDesigned for longevity, 10-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZIPCovers","offers":[{"title":"Default Title","offer_id":47403572265127,"sku":"Custom-Log-Splitter-Covers---Electric-Log-Splitter","price":82.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/6260\/5223\/files\/CustomLogSplitterCovers-ElectricLogSplitter.webp?v=1783400835"},{"product_id":"custom-log-splitter-covers-horizontal-vertical-gas-log-splitter","title":"Custom Log Splitter Covers - Horizontal\/Vertical Gas Log Splitter","description":"\u003cdiv class=\"descTab\"\u003eDescription\u003c\/div\u003e\n\u003cp\u003eSearches for log splitter covers horizontal vertical gas usually come from owners who need one cover sized to the position the splitter is stored in, not a loose tarp. ZIPCovers makes each cover to your splitter's measurements in heavy-duty 18-ounce, 1000 Denier PVC-coated polyester that is waterproof and UV-stabilized, and backs it with a up to 10-year warranty.\u003c\/p\u003e\n\n\u003ch2\u003eWhat this cover is and who it is for\u003c\/h2\u003e\n\u003cp\u003eA convertible gas log splitter does the hard work of the firewood season, then often sits in the wood lot or beside the shed for months. Left bare, rain and dew rust the I-beam, corrode the hydraulic cylinder and work their way into the engine. Stock covers are usually baggy and leaky, and the sharp wedge tears thin covers within a season.\u003c\/p\u003e\n\u003cp\u003eThis cover is tailored to the dimensions of your splitter, so it follows the outline of the beam, the engine, the cylinder and the log cradle without sagging or bunching. It is for homeowners, farms and small firewood businesses that own a horizontal and vertical gas splitter and want it protected between splitting sessions and through the off-season.\u003c\/p\u003e\n\n\u003ch2\u003eHow to measure your log splitter\u003c\/h2\u003e\n\u003cp\u003eWhen measuring your log splitter for a cover, measure in the position you store it in.\u003c\/p\u003e\n\u003col\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLength.\u003c\/strong\u003e Measure from the front of the tongue or tow hitch to the back end of the beam, at the longest point.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWidth.\u003c\/strong\u003e Measure across the widest part, usually the engine or the wheels and fenders.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHeight.\u003c\/strong\u003e Measure from the ground to the highest point, often the top of the engine, the fuel tank or the raised beam.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eIf you store the splitter in its vertical position, measure it standing up. If you store it horizontal, measure it lying down. Round each number up to the nearest half inch. Note anything that sticks out, such as a log catcher, a handle or a jack stand.\u003c\/p\u003e\n\u003cp\u003eA cover cut to these numbers sits close over the machine. That leaves little loose fabric for the wind to catch, and less slack for the wedge to rub through.\u003c\/p\u003e\n\n\u003ch3\u003eWeather and where to use it\u003c\/h3\u003e\n\u003cp\u003eA splitter faces the full run of weather: summer storms during splitting season, autumn leaves and sap in the wood lot, and freeze-thaw cycles in winter. Water that sits on a bare beam turns to rust, and water that reaches the engine makes for hard starts in spring. The waterproof cover sheds rain and snow, and the weather-resistant coating stays flexible in the cold.\u003c\/p\u003e\n\u003cp\u003eIt works for splitters stored:\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003eIn an open wood lot or field\u003c\/li\u003e\n  \u003cli\u003eUnder a lean-to or carport that lets rain blow in\u003c\/li\u003e\n  \u003cli\u003eIn a barn or shed, to keep dust, sawdust and bird droppings off\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eCare and storage\u003c\/h3\u003e\n\u003cp\u003eHand-wash the cover with mild soap and water and let it air-dry completely. Brush off sawdust and wood chips before you cover the machine. When the cover is off, fold it dry and store it in a moisture-proof container.\u003c\/p\u003e\n\n\u003ch4\u003eWarranty and our promise\u003c\/h4\u003e\n\u003cp\u003eEvery cover has a up to 10-year warranty. It is made to order from your measurements and has our Protection Guaranteed promise.\u003c\/p\u003e\n\n\u003cdiv class=\"descTab\"\u003eFabrics Information\u003c\/div\u003e\n\n\u003ch3\u003eFabric and build\u003c\/h3\u003e\n\u003cp\u003eThe cover is made from heavy-duty 18-ounce, 1000 Denier PVC-coated polyester, engineered for harsh weather without cracking or fading.\u003c\/p\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWaterproof.\u003c\/strong\u003e The coating keeps rain, sleet and snow off the beam, cylinder and engine.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUV-stabilized.\u003c\/strong\u003e It protects hoses, seals and paint from sun damage.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAir vents.\u003c\/strong\u003e A ventilated build lets trapped air and moisture escape, which cuts condensation, mold and mildew.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eReinforced seams.\u003c\/strong\u003e They help keep water out where panels meet.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual side handles.\u003c\/strong\u003e They make the cover easy to put on and take off.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOptional drawstrings and grommets.\u003c\/strong\u003e They add security in wind when the splitter sits in the open.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cdiv class=\"descTab\"\u003eFeature Highlights\u003c\/div\u003e\n\u003cul\u003e\n  \u003cli\u003eCustom-made to any size, style, or shape\u003c\/li\u003e\n  \u003cli\u003eMade with heavy-duty PVC-coated Polyester\u003c\/li\u003e\n  \u003cli\u003eWeatherproof \u0026amp; UV-resistant\u003c\/li\u003e\n  \u003cli\u003eBreathable, ventilated design\u003c\/li\u003e\n  \u003cli\u003eSeamless handling and upkeep\u003c\/li\u003e\n  \u003cli\u003eFunctional \u0026amp; operational design\u003c\/li\u003e\n  \u003cli\u003eDesigned for longevity, 10-year warranty\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"ZIPCovers","offers":[{"title":"Default Title","offer_id":47403572363431,"sku":"Custom-Log-Splitter-Covers---Horizontal\/Vertical-Gas-Log-Splitter","price":124.02,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/6260\/5223\/files\/VerticalGasLogSplitter.webp?v=1783400868"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0729\/6260\/5223\/collections\/Log_Splitter_Covers-web.webp?v=1789723459","url":"https:\/\/zipcovers.com\/collections\/custom-log-splitter-covers.oembed","provider":"ZIPCovers","version":"1.0","type":"link"}